How Often to Clean Draft Beer Lines (& How)

Close-up of draft beer taps on a bar, illustrating a clean, well-maintained draft system

If your draft beer has started tasting a little sour, pouring cloudy, or foaming more than it used to, the culprit usually isn't the keg — it's the lines. Learning to clean draft beer lines on a regular schedule is the single best thing you can do to keep every pour tasting the way the brewer intended, whether you're running a kegerator at home or a multi-tap system in an office break room.

At Mike's, San Francisco's neighborhood shop since 1959 and the Bay Area's keg headquarters, line cleaning comes up a lot with first-time kegerator owners. Here's the plain-English version.

Why draft lines need cleaning at all

Every time beer flows through a line, it leaves a little behind: yeast, protein, hop residue, and sugars. Over days that residue builds into a slimy layer called biofilm, and minerals in the beer leave behind a chalky crust the industry calls beer stone. Both are perfect homes for bacteria and wild yeast — which is exactly what turns a fresh, hoppy pint into something that tastes musty, buttery, or vinegary.

A dirty line doesn't just hurt flavor. Built-up gunk narrows the tubing and grabs at the beer as it passes, which is a common hidden cause of excess foam and slow pours. If you've been chasing a foam problem, the line may be the real story.

How often to clean draft beer lines

The industry standard, set by the Brewers Association, is to clean your draft lines every two weeks.

A few practical rules of thumb:

  • Every two weeks: a full caustic (alkaline) cleaning of the lines, plus disassembling and cleaning the faucets and couplers.
  • At every keg change: at minimum, run cleaner or fresh water through the line — a good habit if a keg kicks between scheduled cleanings.
  • Every three months or so: an acid-based cleaning to dissolve beer stone and mineral deposits that alkaline cleaner can't touch.

Home kegerator owners who only pour occasionally can sometimes stretch the interval a bit, but two weeks is the number to build your routine around — and it's the standard any office running a shared tap should hold to.

Caustic vs. acid: two jobs, two cleaners

These get confused a lot, so here's the short version. Caustic (alkaline) cleaner is your everyday workhorse: it breaks down the organic stuff — protein, yeast, hop resin, and biofilm. Acid cleaner handles the inorganic side — the calcium and beer stone that build up slowly and leave lines feeling gritty. Most people run caustic on the two-week schedule and add an acid clean quarterly. Always follow the product's dilution and contact-time instructions, and never mix the two.

The basic cleaning routine

You don't need to be an engineer to do this. A simple hand-pump or recirculating cleaning kit and a bottle of beer-line cleaner will cover a home setup.

  1. Disconnect the keg and hook the cleaning bottle to the line.
  2. Push cleaning solution through until it runs clear at the faucet, then let it sit — the Brewers Association recommends recirculating cleaner for at least 15 minutes on longer runs.
  3. Take the faucet apart and soak the parts; brush the coupler.
  4. Flush thoroughly with clean water until there's no trace of cleaner, reconnect the keg, and pour a short test glass before serving.

Caustic cleaner is a strong chemical — wear gloves and eye protection, and keep it away from skin. If a full teardown feels like more than you signed up for, that's normal: our draft line cleaning service, priced per faucet, does it for you.

The Mike's angle

We stock the cleaning kits and draft equipment you need to keep a system running clean, and our repair & maintenance services cover the rest. When it's time for a fresh pour, our full keg selection — from local craft to beer kegs by the half-barrel and sixtel — is ready for same-day delivery in SF (orders by 9 AM, Tuesday through Saturday), with scheduled runs to the East Bay and South Bay. Not sure what your setup needs? Give the shop a call.

Keep your lines clean and your beer will thank you. Browse our kegs and we'll help you pour it right.

Frequently asked questions

How often should I clean my draft beer lines?

Every two weeks is the Brewers Association standard. Do a caustic cleaning of the lines and faucets on that schedule, plus an acid cleaning every few months to remove mineral buildup.

What happens if I don't clean my beer lines?

Biofilm and bacteria build up inside the tubing, which makes beer taste sour, musty, or buttery and often causes extra foam and slow pours. Regular cleaning is the simplest way to keep every pour tasting fresh.

Do I need special equipment to clean beer lines at home?

Just a hand-pump or recirculating cleaning kit and a bottle of beer-line cleaner. Wear gloves and eye protection with caustic cleaner, and always flush thoroughly with clean water before reconnecting the keg.